Vinyl is an extravagance and tough flooring material. It is a significant well-known choice for its nearby likeness with credible wood and hardwood flooring. Probably the most appealing highlights of vinyl are simple installation and low upkeep. Furthermore, it feels good to stroll on these floors.
Discussing adaptability, vinyl can be utilized for an assortment of indoor applications, like a family room, room, kitchen, and even shower.
Be that as it may, there are times when you need to re-try the installation taking into account an impending remodeling project. Furthermore, for that, you need to remove your vinyl flooring.
In this article, we talk about some of the stunts to remove vinyl flooring without taking assistance from the floor substitution service. Look at the accompanying –
Method 1: Scrape the Floor –
- At the point when old and dried, the cement utilized for fixing vinyl tiles appears to be more diligent than regular stones. Considering the exhortation that you shouldn’t install new vinyl flooring on the existing one, you need to dispose of the current sheet and paste.
- Take chalk or pencil to stamp the floor in equal segments of 5 or 6 inches.
- Cut across those lines utilizing a utility blade. Utilize a block etch and mallet to reach underneath the vinyl tile.
- This will release the grasp of the tile. Presently, pull the tile up to uncover its sponsorship and paste loaded subfloor.
- Take a paint snapper or remover instrument to remove the paste.
- On the off chance that the paste is too solid to even consider working with, utilize a hotness weapon to soften it and remove it easily.
- If you involved tar-based paste for vinyl tile installation last time, you can utilize water to relax it.
Method 2: Drill and Saw –
- Drill an opening on the floor surface. Ensure that it crosses the vinyl tile just as the underlayment and subfloor. This is the most ideal way to decide the precise thickness of the pressed wood subfloor – the most appropriate subfloor material for vinyl tiles.
- Make 1/8 creeps on the saw sharp edge to remove a segment of the flooring.
- You should utilize a corresponding saw while cutting vinyl flooring close to dividers. It is prudent here that you mark the floor bar with chalk in advance to try not to harm the design.
- It is additionally recommendable that you should cut the floor in little segments. This is a lot more straightforward than cutting and removing tiles and pressed wood subfloor from an enormous region.
- To remove the pressed wood subfloor too, track down every one of the screws, unscrew them, and cautiously remove the pressed wood board.
- To make both of the techniques work, you should work with the right apparatuses. A portion of the devices needed to finish this task like a professional is: wide clay blade, block etch, floor scrubber, utility blade, paint scrapper, heat weapon, hot/warm water, dry material piece(s), responding saw, swaying saw, drill machine, and sander.
Assuming that you are uncertain with regards to anything, it should gain it from YouTube how-to recordings first. Try not to go for a DIY installation, if you are not sure with regards to the installation. All things considered, it is shrewd to take care of business by an accomplished professional like Fine Floors by Ed White.
